0755-27502933 
Company philosophysaving, efficient, harmonious and pragmatic
|
|
|
|
|
|
|
Product
PRODUCT  service
 
Product menu
YC-803 series of drum solid capacitors automatic aging machine
    Publish time 2019-07-23 15:15    

一, the equipment profile

YC-803 series of drum solid capacitors aging machine - is our company for polymer capacitors (solid) developed by a highly efficient aging, testing and sorting as one of the aging test equipment; the device using automatic preset boost mode The equipment to fully mechanized operation design, breaking the traditional aging equipment to be equipped with compressed air to run the limitations of the equipment to run more stable and simple, the use of equipment, The Chinese operation interface and a strong industrial control system, so that data collection, analysis is more simple, greatly improve production efficiency.
1, the aging temperature: at room temperature to 130 ℃ within the free set;
2, the device weighs about 1500KG
3,3000 (L) x 1850 (W) x 1750 (H)
4, the total power of about 10KW equipment, the normal production of the average operating power ≤ 6KW

, the scope of adaptation:

Equipment model

Product shell number

Aluminum height

Production voltage

The number of racks

Number of clamps

Number of products carried

Thickness of partition

Aging power supply

YC-803X

Ф5-6

5-11mm

3-160V/2A

160 only

60 only

9600 only

2.0 mm

8 segment

YC-803A

Ф8

7-12mm

3-160V/2A

160 only

40 only

6400 only

2.4 mm

8 segment

YC-803B

Ф10

7-12mm

3-160V/2A

160 only

40 only

6400 only

3.0mm

8 segment

Instrumentation indicators
1, the capacity test range: 0.01uF-19.9mF range of test accuracy of ± 1.0%;
2, the loss angle: 0.001-0.999, the test accuracy of ± 1.0%;
3, capacity test frequency: 120Hz, 1KHz (2 kinds) can be set alone;
4, leakage current test range: 0.005μA-9999μA, test accuracy of ± 1.0%, two leakage test;
5, ESR test range: 0.01mΩ-999kΩ, test accuracy of ± 1.0%, test frequency: 1K, 10K, 20K, 100K can be set separately (ESR standard domestic models, need to import the brand, set the equipment to be confirmed).
三, the working principle:
1, the product guide needle shaping and do polarity detection, open circuit, short circuit and reverse polarity detection; exclude open circuit, short circuit, bending feet and anti-polar products;
2, the product into the oven for high temperature by digital power charging aging;
3, the product after the discharge cooling, the aging product is not detected, will exclude the aging products;
4, the product recharging about 40 seconds after the leakage current test;
5, the product after discharge capacity and loss of the angle test;
6, the product after the discharge by the "ESR" test;
7, test reports: built-in software can export summary report data, compatible with Excel for the second analysis;
8, the test results are: good products, poor capacity, high loss, large leakage, high impedance and re-seized goods;
, the equipment performance:

model

YC-803X

YC-803A

YC-803B

Stalls out of the material
Time (minutes)

120

150

180

210

240

90

120

150

180

240

90

120

150

180

240

Go in and out every minute
Number (only)

80

60

50

45

40

70

50

40

35

25

70

50

40

35

25

1, the number of incoming and outgoing materials for the "test run" the actual number of minutes per minute, the error within ± 2;
2, the user can according to their own characteristics of the product stalls to select the product to ensure that the aging effect.
3, test voltage, test charging voltage and short-circuit test voltage are set up in an independent way, effectively ensuring the accuracy of product testing.
五, the use of environmental conditions:
1, using three-phase five-wire AC380V ± 5% 50Hz / 10KVA power supply;
2, the use of ambient temperature: room temperature;
3, the characteristics of the guarantee range: 23 ± 5 ℃, 45 ~ 75% RH.
4, need to use pressure ≥ 0.35MPa compressed air.





Expressway
Contact us
Products
About us
News
XML 地图 | Sitemap 地图