一、Introduction to equipment
　　 YC-806YC-806 series of drum-type high-pressure aging machine - is our company for small high-pressure (Ф6-10) production of aging equipment; the device uses automatic preset boost mode for automatic booster high temperature aging, the default authority to be authorized Password operation, to avoid misuse of the hidden dangers; the biggest feature of the machine to maximize energy savings, the normal production of energy consumption ≤ 6KW; equipment to fully mechanized operation design, breaking the traditional aging equipment to be equipped with compressed air to run the limitations Equipment operation is more stable; simple Chinese operation interface and a strong industrial control system, so that data collection, analysis is more simple and convenient, greatly improve production efficiency.
1, the aging temperature: in the room temperature to 105 ℃ within the free set;
2, Dimensions: 3700mm (L) × 1858mm (W) × 1750mm (H);
3, the device weight about 1500KG;
4, the total power of about 10KW equipment, the normal production of the average operating power ≤ 6KW.

二、Adaptation scope：

Instrumentation indicators
1, the capacity of the test range: 0.01uF-19.9mF within the test accuracy of ± 0.5%;
2, the loss angle: 0.001-0.999, the test accuracy of ± 1.0%;
3, capacity test frequency: 100Hz, 120Hz, 1KHz (3 kinds) can be set alone;
4, leakage current test range: 0.005μA-9999μA, test accuracy of ± 1.0%, two leakage test;
5, ESR test range: 0.01mΩ-999MΩ, test accuracy ± 1.0%;
6, ESR test frequency: 1K, 10K, 20K, 50K, 100K can be set alone;
7, test data preservation: not less than 1 year, the user can be required according to the data into other storage devices, so that forever preserved;
8, test reports: built-in software can export summary report data, compatible with Excel for the second analysis;
三, the working principle:
1, the product guide needle shaping and do polarity detection, open circuit, short circuit and reverse polarity detection; exclude open circuit, short circuit, bending feet and anti-polar products;
2, through the aging of the product of the precise control of the product into the first paragraph, the aging voltage can be set to the highest aging voltage of 70-80%, to ensure product safety
        Under the premise of greatly compressed the product of the boost time and improve the aging rate of the product;
3, the product recharging about 40 seconds after the leakage test;
4, the product after the discharge cooling, the aging product is not detected, will exclude the aging products;
5, the product after discharge capacity and loss of the angle test;
6, (this function is optional function) product discharge and then "ESR" test;
7, the product by a special material extraction system out of the material, put an end to the fixture caused by the possibility of mixed products into the possibility; test results: good products, poor capacity,
High loss, large leakage, high impedance and heavy seized goods;
四, the equipment performance:

1, the user can according to their own characteristics of the product stalls to ensure that the aging effect of the product to select the stall requirements.
2, the test voltage: test charging voltage and short circuit test voltage are set up in an independent way, effectively guarantee the product testing accuracy.
五, the use of environmental conditions:
1, using three-phase five-wire AC-380V ± 5% 50Hz / 10KVA power supply;
2, the use of ambient temperature: room temperature;
3, the characteristics of the guarantee range: 23 ± 5 ℃, 45 ~ 75% RH.